Aeon water filter cartridges are the key element in your water filtration set-up. The type of cartridge is an important choice to ensure that your system is removing the pollutants in your water supply.
You must also remember that water filter cartridges should be replaced at regular intervals in order for your system to operate at its maximum capacity and efficiency.
The cartridges listed below are our most popular, however, should you require a specilised cartridge for your system please contact us.
The test results below are sourced from the National Analytical Laboratories, Melbourne, Australia. They are provided here so you can compare the effectiveness of each cartridge type. Before choosing your next cartridge, however, please speak to your Aeon representative.
Sediment Cartridges
From $16.50
Aeon Water filters provides a wide range of sediment cartridges to reduce the presence of dirt, rust ,odour, sand, silt and algae. These cartridges are available in both polyspun and woven and are made from virgin polypropylene. Sediment cartridges are available in 1, 5, 10, 20, 50, and 75 microns.
Carbon Block Cartridges
From $49.50
Aeon provides a superior range of carbon cartridges which uses the latest leading edge technology available. The cartridges are constructed from bonded activated carbon, offering a superior treatment of water with no release of carbon fines. Carbon cartridges are highly effective in reducing, taste, odour, chlorine and sediment (also available in long life granular format). The cartridge life expectancy ranges from 6–12 months or 2000 Litres and is dependent on the quality of the water supply and the consumption rate. Carbon block cartridges are available in 1, 5, 10, 20, 50, and 75 microns.
Carbon Designer Cartridge
From $75.00
The Carbon designer cartridge has been designed to give you economical and great tasting water. It reduces chlorine, ammonia, pesticides, decayed organic matter, trihalomethanes, rust and unpleasant tastes and odours. The Carbon cartridge life expectancy ranges from 6–12 months or 3800 Litres and is dependent on the quality of the water supply and the consumption rate. The Carbon cartridge is Australian made and has been tested on Australian water.
| Pollutant Chemical | Influent ppm | Effluent ppm | % Reduction |
|---|---|---|---|
| Fluoride | 7.3 | 7.3 | 0 |
| Chlorine | 3.0 | <0.2 | >93 |
| Ammonia | 31 | 8 | 91 |
| Lead | 1840 | 644 | 65 |
| Aluminium | 2 | 2 | 0 |
| Copper | 540 | 329.4 | 39 |
| Chloroform | 34.6 | 0.67 | 98 |
| Bromodichloromethane | 2.67 | 0.032 | 99 |
| Dibromochloromethane | 4.49 | 0.21 | 95 |
Resin/Carbon Designer Cartridge
From $68.00
The Resin/Carbon cartridge is one of the most effective cartridges to use for the reduction of heavy metals from the water supply. These include fluoride, ammonia, iron, copper, lead, sodium, magnesium, calcium. The Resin/Carbon cartridge life expectancy is between 4–6 months or 816 Litres and is dependent on the quality of the water supply and the consumption rate. The Resin/Carbon cartridge is Australian made and has been tested on Australian water.
| Pollutant Chemical | Influent ppm | Effluent ppm | % Reduction |
|---|---|---|---|
| Fluoride | 7.3 | 0.2 | 99 |
| Chlorine | 3.0 | <0.2 | >93 |
| Ammonia | 31 | 1.1 | 96 |
| Lead | 1840 | 93 | 95 |
| Aluminium | 2 | 0.26 | 87 |
| Copper | 540 | 51 | 91 |
| Chloroform | 34.6 | 8.6 | 75 |
| Bromodichloromethane | 2.67 | 0.22 | 92 |
| Dibromochloromethane | 4.49 | 0.21 | 95 |
| Bromoform | 4.85 | 0.15 | 97 |
KDF/Carbon Designer Cartridge
From $99.00
The KDF/Carbon designer cartridge gives you the best of both worlds if you prefer to leave the Fluoride in your water but reduce the amount of heavy metals. This cartridge is specifically designed to reduce chlorine, organic matter, pesticides, ammonia, aluminium, iron, copper, lead, rust, unpleasant taste and odours. The KDF/Carbon cartridge life expectancy is between 6–12 months or 4000 Litres and is dependent on the quality of the water supply and the consumption rate. The KDF/Carbon cartridge is Australian made and has been tested on Australian water.
| Pollutant Chemical | Influent ppm | Effluent ppm | % Reduction |
|---|---|---|---|
| Fluoride | 7.3 | 6.2 | 15 |
| Chlorine | 3.0 | <0.2 | >93 |
| Ammonia | 31 | 10 | 89 |
| Lead | 1840 | 110.4 | 94 |
| Aluminium | 2 | 1.1 | 45 |
| Copper | 540 | 27 | 95 |
| Chloroform | 34.6 | 2.95 | 91 |
| Bromodichloromethane | 2.67 | 0.16 | 94 |
| Dibromochloromethane | 4.49 | 0.22 | 95 |
| Bromoform | 4.85 | 0.30 | 94 |
Cation/Resin Carbon Designer Cartridge
From $79.00
The Cation/Resin Cartridge is specifically designed to reduce hardness and alkalinity of water. It also reduces the amount of heavy metals present in water such as ammonia, lead, fluoride, copper aluminium. The Cation/Resin Cartridge life expectancy is between 4–6 months or 850 Litres and is dependent on the quality of the water supply and the consumption rate. The Cation/Resin Cartridge is Australian made and has been tested on Australian water.
| Pollutant Chemical | Influent ppm | Effluent ppm | % Reduction |
|---|---|---|---|
| Fluoride | 7.3 | 5.4 | 25 |
| Chlorine | 3.0 | 0.2 | 93 |
| Ammonia | 31 | 1.8 | 94 |
| Lead | 1840 | 300 | 84 |
| Aluminium | 2 | 1.5 | 25 |
| Copper | 540 | 240 | 56 |
| Chloroform | 34.6 | 2.95 | 93 |
| Bromodichloromethane | 2.67 | 0.15 | 94 |
| Dibromochloromethane | 4.49 | 0.23 | 95 |
| Bromoform | 4.85 | 0.27 | 94 |
Silver Carbon Designer Cartridge
From $85.00
The Silver Carbon Cartridge has been specifically designed to reduce bacteria which can be found in tank water. It also reduces Chlorine, Ammonia, Pesticides, Trihalomethanes and unpleasant tastes and odours. The Silver Carbon Cartridge life expectancy is between 6–12 months or 3800 Litres and is dependent on the quality of the water supply and the consumption rate. The Silver Carbon Cartridge is Australian made and has been tested on Australian water.
In-Line Series
From $69.00
Inline Cartridges are available in 3 configurations including Sediment, Carbon and Triple Action including Scale Removal.
These cartridges are used where space is limited and are suitable for ice makers, coffee/vending machines, refrigerators, reverse osmosis drinking kits etc.
They have a flow rate of up to 10 litres per minute and come in two lenghth options – 15cm (6 inch) and 25.5cm (10 inch).
Inline filters are simple to install and can be supplied with an optional quick-connect fitting kit.
Ceramic Filter Series
From $110.00
Ceramic flters are designed to be used in conjunction with a prefilter as they have a very fine 0.4 micron rating.
They reduce sediment, bacteria, taste, odour, chlorine, heavy metals and cysts from drinking water.
Extended life is achieved through a cleanable ceramic surface. The filter is also impregnated with silver for bacteriostatic control.
Available in 25.5cm (10 inch) height with a flow rate of up to 7 litres per minute.